CG-CT5-200*50-1200W

CG-CT5-20050-1200W Water Cooling LED UV Curing Machine

The CG-CT5 series is a linear water-cooled UV LED curing machine built for continuous high-speed production lines. With a 200 x 50 mm emitting window, 1200W optical output and 395nm wavelength, it delivers deep, uniform curing of UV inks, varnishes, coatings and adhesives without mercury, ozone or VOC discharge.

Technical Specifications

Key Advantages

• Energy saving: 1000W LED UV output is equivalent to roughly 6000W of a traditional mercury lamp drying effect.
• Environment friendly: no mercury, no ozone generation and no VOC discharge.
• Instant on/off: no warm-up and no shutter delay, ready for high-speed indexing.
• Low temperature: cold light output protects heat-sensitive substrates such as PE film and thin foil.
• Long lifespan: 20,000 hours rated lamp life, 2-year warranty on the complete system.
• Stable output: constant-current power supply keeps UV intensity stable across long production runs.

Typical Applications

• Flexo, offset and digital printing ink curing
• Coating, varnish and lacquer surface curing
• Adhesive and laminating curing for film, tape and labels
• Electronics conformal coating and component bonding
• 3C, medical device and packaging decoration lines

Working Notes

The lamp head must be connected to a matched water chiller. Recommended coolant flow is 6-10 L/min with inlet water temperature below 25°C. Keep the quartz lens clean and keep the emitting window 30-50 mm from the substrate to obtain the rated UV intensity.

FAQ

Q: What wavelength should I choose?
A: 395nm/385nm is normally used for printing inks, while 365nm is preferred for adhesives and deep curing.

Q: Can the emitting window be customized?
A: Yes. The CT5 platform is available in other lengths and widths on request.

Q: Can the UV intensity be adjusted?
A: Yes, output is steplessly dimmable from 0% to 100%.

Q: What is the lead time?
A: 10-15 working days for standard configurations.