365nm 395nm Lab UV Curing Chamber 1000W Air Cooled 300x300mm For Adhesive Cure Testing

Lab UV Curing Chamber 365nm 395nm 1000W Air Cooled 300x300mm For Adhesive Cure Testing

Purpose built for R&D and small batch work

This 300x300mm bench-top UV curing chamber is designed for engineers who need repeatable cure results before a line is committed. Samples sit on a fixed tray at 30-50mm from the LED head, the intensity is dialled in from 0% to 100%, and the same recipe can be replayed on the next trial. Two wavelengths are selectable, so a 365nm adhesive trial and a 395nm ink trial can run on the same cabinet instead of two machines.

Why labs pick this cabinet

• Wavelength comparison in one unit: switch between 365nm and 395nm to see how a formulation responds before choosing a production wavelength.
• Repeatable intensity: 0-100% dimming lets you fix a curing profile and repeat it across batches and operators.
• Air cooled head: no chiller, no water lines, no plumbing work in the lab, and low heat load on temperature sensitive samples.
• Compact footprint: 300x300mm opening fits trays, jigs and small assemblies while keeping bench space free.
• Shielded chamber: enclosed curing area keeps stray UV away from operators during trials.

Technical specification

Typical trial scenarios

• Comparing 365nm and 395nm photoinitiator response on a new adhesive batch
• Deciding the intensity and dwell time before scaling a coating process to a conveyor line
• Curing samples of optical lens bonding, sensor potting and PCB protective coating
• Small batch rework and repair where a full conveyor run is not justified

Purchasing notes

Single set orders are accepted for evaluation. Chamber opening, wavelength and lamp colour can be specified per order, and OEM branding is available for distributors and integrators. Spare LED modules and power supplies are stocked for after-sales support.

FAQ

Q1: Can I run 365nm and 395nm in the same cabinet?
A1: Yes, both wavelengths are standard. Tell us the split you need per unit when ordering.

Q2: Is a chiller required?
A2: No. The head is air cooled and plugs into a standard AC85-265V supply.

Q3: How do I keep trials repeatable?
A3: Fix the sample distance at 30-50mm, record the dimming percentage and dwell time, then repeat the same settings on the next batch.

Q4: Can the 300x300mm opening be changed?
A4: Yes, 200x200mm up to 800x800mm openings are built to order.

Q5: What support is included?
A5: 1 year warranty on the complete system, with stocked LED module and power supply spares.