UV Curing Transfer Printing Adhesive Fast Cure Easy Release for PC PET Decoration

UV Curing Transfer Printing Adhesive

3315 UV Curing Transfer Printing Adhesive is a light yellow transparent UV adhesive for transfer printing decoration. It offers lower cost, fast curing and easy release, with some adhesion to PC and PET. The cured layer is transparent and anti-yellowing, making it suitable for general PC and PET plastic transfer printing such as phone decoration, key transfer, appliance textures and belt buckles.

Technical Specifications

Key Features

• Lower cost formulation for general transfer applications
• Fast curing for efficient transfer production
• Easy release (demolding) after curing
• Good adhesion to PC and PET substrates
• Transparent, anti-yellowing cured surface
• Suitable for decorative transfer printing

Applications

• General PC and PET plastic transfer printing
• Phone decoration transfer
• Keypad and key transfer
• Home appliance texture transfer
• Belt buckle decoration transfer

Operation Guide

1. Surface preparation: clean the PC or PET substrate to remove oil, dust and contaminants for maximum adhesion.
2. Coating: apply the UV transfer adhesive evenly to the film or mold surface.
3. Lamination: place and press the substrate onto the coated surface, removing any trapped air.
4. UV curing: expose the adhesive to UV light at 1000 mJ/cm² (UV) until fully cured.
5. Release: peel the carrier film or mold away from the cured transfer layer.
6. Inspection: verify a uniform, transparent transfer with no bubbles or whitening.

FAQ

Q1: What is the 3315 adhesive mainly used for?
3315 is a UV curing transfer printing adhesive for PC and PET plastic decoration, such as phone decoration, key transfer and appliance textures.

Q2: Which substrates does it bond to?
It provides good adhesion to PC and PET plastic substrates.

Q3: Does it release easily after curing?
Yes. The cured adhesive is easy to release (demold) from the carrier film or mold during transfer.

Q4: Does the cured surface stay clear?
Yes. The cured adhesive is transparent and anti-yellowing for a clean decorative finish.

Q5: What hardness and adhesion does it provide?
3315 has a pencil hardness of HB and a 100 grid test adhesion rating of 5B.

Q6: What are the storage conditions and packaging?
Store at 8-28°C in the original sealed container. Shelf life is 12 months. Available in 5kg / 25kg packaging.