|
Product Details:
|
| Product Model: | 3316S | Product Type: | Single-Component UV Adhesive |
|---|---|---|---|
| Main Ingredient: | Acrylate | Appearance: | Transparent Liquid |
| Viscosity (25°C): | 800–1500 MPa·s | Density (25°C): | 1.05 ± 0.05 G/cm³ |
| Suitable Substrates: | PC, PMMA, ABS, PVC | Application: | Plastic-to-Plastic Bonding |
| Curing Wavelength: | 365NM | Surface Drying Time: | 3–10 Seconds (365nm UV LED) |
| Full Curing Energy: | 1000–2000 MJ/cm² | Hardness (Shore D): | 70–80 |
| Operating Temperature: | -40°C To 80°C | Shelf Life: | 12 Months |
| Storage Conditions: | Below 25°C, Protected From Light | ||
| Highlight: | UV curable adhesive for plastic bonding,UV adhesive plastic bonding,UV cure adhesive for plastics |
||
Super Curing 3316S is a single-component UV-curable adhesive specially developed for bonding a wide range of plastics, including PC, PMMA, ABS and PVC.
With fast curing speed, low shrinkage and low odor, this transparent adhesive provides strong bonding performance for plastic-to-plastic assembly. Its convenient single-component formulation makes it suitable for industrial bonding processes and precision assembly applications.
Wide Plastic Compatibility: Suitable for bonding PC, PMMA, ABS, PVC and other compatible plastics.
Fast UV Curing: Rapid surface drying under suitable UV LED irradiation.
Strong Bonding Performance: Tensile strength of ≥15 MPa.
Low Shrinkage: Helps reduce stress during the curing process.
Low Odor: Suitable for industrial bonding applications.
Easy Application: Single-component formulation, no mixing required.
Transparent Appearance: Helps maintain a clean bonding appearance.
| Parameter | Specification |
|---|---|
| Product Model | 3316S |
| Product Type | UV-Curable Adhesive |
| Appearance | Transparent Liquid |
| Viscosity (25°C) | 800–1500 mPa·s |
| Density (25°C) | 1.05 ± 0.05 g/cm³ |
| Curing Wavelength | 365–405 nm |
| Surface Drying Time | 3–10 seconds (365nm UV LED) |
| Full Curing Energy | 1000–2000 mJ/cm² |
| Hardness (Shore D) | 70–80 |
| Tensile Strength | ≥15 MPa |
| Elongation at Break | ≥20% |
| Operating Temperature | -40°C to 80°C |
| Packaging | 1 kg |
3316S UV adhesive is suitable for various plastic bonding applications, including:
PC (Polycarbonate) bonding
PMMA (Acrylic) bonding
ABS plastic assembly
PVC plastic bonding
Transparent plastic component assembly
Industrial plastic parts bonding
Precision plastic product assembly
Ensure the bonding surfaces are clean, dry and free from oil or contaminants.
Apply the adhesive evenly to the bonding surface.
Align and assemble the plastic components.
Expose the adhesive to a suitable UV LED light source until the required curing level is achieved.
Check the bonding strength and curing result before production.
The adhesive is compatible with UV light sources in the 365–405 nm wavelength range.
A 365 nm UV LED light can achieve surface drying in approximately 3–10 seconds under the specified test conditions.
The recommended full curing energy is 1000–2000 mJ/cm². Actual curing performance depends on UV intensity, irradiation distance, adhesive thickness, substrate transparency and material compatibility.
Super Curing can provide UV LED curing equipment to match different adhesive curing requirements.
Store in a cool, dry place away from direct sunlight and UV exposure.
Recommended storage temperature: 5–25°C.
Shelf life: 6 months under the specified storage conditions.
Avoid direct contact with skin and eyes.
Wear appropriate protective equipment during handling.
For industrial use only. Not intended for food-contact or medical applications.
Looking for a suitable UV adhesive for your plastic bonding application?
Super Curing provides UV curing equipment and adhesive solutions for different industrial applications.
Contact us with your substrate materials, bonding requirements and production conditions. Our team can help you evaluate a suitable UV adhesive and UV LED curing solution.
Contact Super Curing for Technical Support & Product Inquiries.
Contact Person: Eric Hu
Tel: 0086-13510152819