UV Curing Large Area Glass Bonding Adhesive Low Viscosity Flexible Low Odor

UV Curing Large Area Glass Bonding Adhesive

3000 UV Curing Large Area Glass Bonding Adhesive is a light yellow transparent UV adhesive specially formulated for large-area glass bonding such as glass table pillars and glass edges. It offers low viscosity with good flow, low hardness with excellent flexibility, and low odor for reduced irritation, and cures to a clear layer free of whitening or iridescent patterns.

Technical Specifications

Key Features

• Low viscosity with good flow
• Low hardness with excellent flexibility
• Low odor for reduced irritation
• Cured layer free of whitening and iridescent patterns
• Ideal for large-area glass bonding
• Suitable for glass table pillars and glass edges

Applications

• Large-area glass bonding
• Glass table pillars and glass edge bonding
• Bonding of large glass panels and architectural glass
• Applications requiring flexibility and good flow
• Bonding requiring a clear, whitening-free finish

Operation and Curing Guide

1. Surface preparation: clean the glass surfaces to remove oil, dust and contaminants for full adhesion.
2. Dispensing: apply the low-viscosity adhesive over the large bonding area and allow it to flow evenly.
3. Assembly: position and join the glass parts, pressing to spread the adhesive and removing excess before curing.
4. UV curing: expose the adhesive to UV light at 1500 mJ/cm² until fully cured.
5. Inspection: verify a clear, uniform bond with no whitening or iridescent patterns.
6. Rework: gently separate bonded parts, clean the surfaces and re-apply the adhesive when repair is needed.

FAQ

Q1: What is the 3000 adhesive mainly used for?
3000 is a UV curing adhesive for large-area glass bonding such as glass table pillars and glass edges.

Q2: Why is low viscosity important?
The low viscosity provides good flow, so the adhesive spreads evenly across large glass areas for a uniform bond.

Q3: Is it flexible?
Yes. 3000 has low hardness and excellent flexibility, helping to absorb stress in large glass assemblies.

Q4: Does the cured layer stay clear?
Yes. The cured adhesive layer is free of whitening and iridescent patterns for a clean, transparent finish.

Q5: What hardness and strength does it provide?
3000 has a Shore D 38 hardness, a tensile strength of 9 MPa and a shear strength of 10 MPa.

Q6: What are the storage conditions and packaging?
Store at 8-28°C in the original sealed container. Shelf life is 12 months.