|
Product Details:
|
| Highlight: | High-Thixotropy UV Adhesive,Type-C Connector Sealing Adhesive,UV Adhesive Solder Joint Protection |
||
|---|---|---|---|
3523 UV Curable Adhesive is a single-component, high-viscosity acrylic UV adhesive specially formulated for USB Type-C cable solder joint protection, connector pin reinforcement, and precision electronic component fixation.
Engineered with a viscosity of 70,000 ± 15,000 mPa·s and excellent thixotropic properties, 3523 maintains its position after dispensing, helping minimize unwanted adhesive spreading around adjacent connector pins and gold fingers.
Under suitable industrial UV LED curing conditions, it achieves rapid curing in approximately 3–5 seconds, supporting efficient electronic assembly processes and automated production. Available in translucent blue and red, it also allows convenient visual inspection of adhesive application.
1. Fast 3–5 Second LED Curing
Rapid curing under suitable UV LED conditions helps shorten production cycle times and improve assembly efficiency.
2. High Thixotropy & Precise Positioning
High viscosity helps maintain adhesive placement after dispensing, reducing unwanted spreading around delicate connector pins and contact areas.
3. Balanced Rigidity & Flexibility
With 78D hardness and 120% elongation at break, 3523 combines mechanical strength with good elongation properties, making it suitable for electronic component reinforcement and solder joint protection.
4. Adhesion for Electronic Assembly
Designed for electronic bonding, connector reinforcement, and localized protection applications. Compatibility should be validated on actual production substrates.
5. Easy Visual Inspection
Available in translucent blue and red to help operators identify adhesive coverage and monitor dispensing consistency during production.
| Parameter | Specification / Typical Value |
|---|---|
| Product Model | 3523 |
| Product Type | Single-component UV Curable Adhesive |
| Appearance | Blue Transparent / Red Transparent |
| Viscosity (25°C) | 70,000 ± 15,000 mPa·s |
| Hardness | 78D |
| Tensile Strength | 12 MPa |
| Elongation at Break | 120% |
| Curing Energy | 600 mJ/cm² |
| LED Curing Time | 3–5 seconds under suitable conditions |
| Shelf Life | 12 months |
| Storage Temperature | 8–28°C |
| Standard Packaging | 30g / 50g / 300g |
Note: Actual curing performance depends on UV wavelength, light intensity, exposure distance, adhesive thickness, and substrate conditions. Please consult our technical team for recommended curing parameters.
1. USB Type-C & USB Cable Assemblies
Localized protection and reinforcement of cable solder joints and connector pins during electronic cable assembly.
2. Board-to-Board & FPC Connectors
Adhesive reinforcement for delicate connector structures and electronic connection points.
3. Micro-Coaxial & Precision Wire Harnesses
Localized wire fixation and protection in consumer electronics and industrial electronic modules.
4. PCB Component Reinforcement
Securing miniature capacitors, resistors, and other electronic components on printed circuit boards.
Q1: Will 3523 UV adhesive flow onto Type-C gold fingers or contact pins before curing?
With a viscosity of 70,000 ± 15,000 mPa·s and high thixotropic properties, 3523 maintains good positional stability after dispensing, helping reduce unwanted adhesive migration into critical connector contact areas. Actual dispensing performance depends on application parameters and connector geometry.
Q2: How does this adhesive perform under cable bending and mechanical stress?
Once cured, 3523 combines 78D hardness with 120% elongation at break. This balance of mechanical strength and elongation makes it suitable for solder joint reinforcement and electronic assembly protection. Actual reliability should be verified through application-specific testing.
Q3: What UV curing conditions are required for 3–5 second curing?
3523 requires suitable UV LED curing conditions and a curing energy of 600 mJ/cm². Actual curing time depends on lamp wavelength, intensity, exposure distance, and adhesive thickness. Please contact our technical team for equipment compatibility recommendations.
Q4: What packaging options are available for automated dispensing lines?
Standard packaging options include 30g, 50g, and 300g, suitable for different dispensing requirements and production volumes.
Selecting the right UV adhesive is essential for reliable electronic assembly, connector reinforcement, and solder joint protection.
As a UV adhesive manufacturer, we provide professional product recommendations and technical support for different electronic bonding and curing applications.
Contact Our Technical Team
Request the complete Technical Data Sheet (TDS).
Request the Material Safety Data Sheet (MSDS).
Consult our team about UV LED curing equipment compatibility.
Discuss customized UV adhesive solutions for your production process.
Request TDS & MSDS
Contact Technical Support
Contact Person: Eric Hu
Tel: 0086-13510152819