Plastic Bonding UV Adhesive Strong Adhesion Fast Cure High Strength for PS PC

Plastic Bonding UV Adhesive Strong Adhesion Fast Cure High Strength for PS PC

Plastic Bonding UV Adhesive (3303) is a light yellow transparent UV adhesive offering strong adhesion and fast curing for plastic-to-plastic bonding. It bonds PS and PC plastic parts with high strength and a surface dry, tack free finish, making it ideal for medium-area plastic assembly in electronics, displays and packaging.

Technical Specifications

Key Features

• Strong adhesion for reliable plastic-to-plastic bonding
• Fast curing with a surface dry, tack free finish
• Bonds PS and PC plastic parts with high strength
• Medium viscosity for controlled dispensing and flow
• Good adhesion to PC, PS, ABS, PMMA and acrylic
• High hardness (Shore D 58) for a durable bond
• Consistent performance for assembly and packaging

Applications

• Plastic-to-plastic bonding of PS and PC parts
• Medium-area plastic assembly
• Consumer electronics and appliance plastic housing
• Display and packaging plastic assembly
• Bonding of PC, PS, ABS, PMMA, PVC and APET parts

Operation and Curing Guide

1. Surface preparation: clean the plastic surfaces to remove oil, dust and contaminants for maximum adhesion.
2. Dispensing: apply the adhesive evenly to the bonding area.
3. Assembly: position and join the parts, pressing to spread the adhesive and removing any excess before curing.
4. UV curing: expose the adhesive to UV light at 700 mJ/cm² until fully cured.
5. Inspection: verify a uniform bond with a clean, surface dry finish and no bubbles.
6. Rework: gently separate bonded parts, clean the surfaces and re-apply the adhesive when repair is needed.

FAQ

Q1: What is this UV adhesive mainly used for?
It is a plastic bonding UV adhesive recommended for plastic-to-plastic bonding, especially PS and PC parts, with strong adhesion and high strength.

Q2: Which plastics does it bond?
It bonds PS and PC plastic parts well, and also provides good adhesion to ABS, PMMA, PVC and APET.

Q3: How fast does it cure?
It cures quickly under UV light at 700 mJ/cm² to a surface dry (tack free) finish.

Q4: What bond strength does it provide?
It has a Shore D 58 hardness, a shear strength of 7.5 MPa on PC/PC and 6.5 MPa on PC/PVC.

Q5: Is it suitable for clear, invisible bonding?
Yes. It is a light yellow transparent adhesive that forms a clean, high strength bond for plastic assembly.

Q6: What are the storage conditions and packaging?
Store at 8-28°C in the original sealed container. Shelf life is 12 months. Available in 1kg packaging.