Fast Curing Plastic UV Glue Description
"Instant bonding, precise curing." This fast curing plastic UV glue is specially formulated for hard-to-bond materials such as PET, PE, TPU, TAC and PP. Combined with a professional UV light source, it cures in just 3-30 seconds and enables controllable, automated bonding with a 100% yield rate on high-speed plastic assembly lines.
Fast Curing Plastic UV Glue Datasheet
| Model |
Fast curing plastic UV glue |
Packaging specifications |
50g/piece |
| Brand |
Super-curing |
Curing time |
3-30 seconds |
| Application |
Bonding of hard-to-bond plastics PET, PE, TPU, TAC and PP |
Viscosity |
4000-5000 cP |
| Adhesive material type |
Plastic, PET, PE, TPU, TAC, PP |
Environmental protection level |
Superior |
| Color |
Transparent |
Temperature resistance |
-50°C to 150°C |
Product Details Description
Product Applications
- Bonding of hard-to-bond plastics: PET, PE, TPU, TAC and PP
- Camera lens protector bonding, glass to aluminum alloy
- Optical component and precision lens assembly
- Consumer electronics plastic housing and cover glass
- Touch screen and display panel lamination
- Medical device transparent plastic assembly
- Automotive interior plastic parts and trim bonding
- Toys, packaging and label adhesion
- Acrylic (PMMA) and polycarbonate (PC) structural bonding
Precautions
- Surfaces must be clean, dry and free of oil, dust, moisture or mold release agents before applying.
- UV curing requires light to reach the adhesive; opaque or UV-blocking materials (such as black or dark-colored plastics) may not fully cure.
- Keep parts away from UV light until they are correctly positioned to avoid premature curing.
- Apply in a well-ventilated area. Avoid contact with skin and eyes; wear protective gloves and safety goggles.
- In case of skin or eye contact, rinse immediately with plenty of clean water and seek medical advice if irritation persists.
- Store sealed in a cool, dark and dry place away from direct sunlight, and keep out of reach of children.
- Cured strength may vary with substrate, gap and UV intensity; please run a bonding test before mass production.
FAQ
Q1: How fast does this plastic UV glue cure?
It cures in 3-30 seconds under a professional UV light source. Exact time depends on UV intensity, adhesive layer thickness and the substrate being bonded.
Q2: Which materials can this UV glue bond?
It is designed for hard-to-bond plastics including PET, PE, TPU, TAC and PP, and also bonds well to PMMA, ABS, PC, glass, crystal and aluminum alloy.
Q3: What UV light source and wavelength are required?
A 365nm or 395nm UV LED curing lamp is recommended. The light must reach the bond line, since UV curing requires exposure to activate.
Q4: Is the cured adhesive transparent?
Yes. After curing the glue forms a transparent, colorless bond line that will not affect the appearance of optical or transparent parts.
Q5: What is the packaging and minimum order quantity?
Standard packaging is a 50g plastic bottle, and the minimum order quantity is 10 pieces. Custom packaging is available on request.
Q6: How should the glue be stored and what is its shelf life?
Store in a cool, dark and dry place away from direct sunlight. Unopened shelf life is approximately 12 months; keep the bottle sealed after use.
Your message must be between 20-3,000 characters!
English
